collective unconscious of the smarter planet

HP and Cisco are beginning to work more closely together again - following the fall-out around Cisco’s introduction of UCS and HP’s purchase of 3Com. Apparently customers continue to want more choice when it comes to networking options. Who knew? This Forrester post also has some interesting arguments concerning customer uptake of converged solutions from IBM and Dell, as well.

The thawing of the cold war between HP and Cisco breaks down the walls that limited choice and, hopefully, ignites more innovation between the companies. HP customers can now connect and configure their HP BladeSystem c-Class infrastructure with Cisco’s Unified Fabric.  Quietly, HP has been offering Cisco’s legacy switching technology in its c-Class BladeSystem enclosure but halted integration with Cisco’s next generation data center products after HP acquired 3Com and Cisco released UCS.  Similar to Juniper’s QFabric architecture that extends virtual line cards to server edge, the relationship between a fabric extender and a Nexus 5000 is similar to the relationship between a traditional 6500 line card and its supervisor engine, only now the fabric extender can be connected to its master switch — Cisco Nexus 5000 — with remote fiber connections. This allows I&O to effectively decouple the line cards of the modular switch and spread them throughout the data center, all without losing the management model of a single “End of Row” switch. The master switch and all its remotely connected fabric extenders are managed as one Cisco Nexus switch.

As Rich Fichera points out in his blog, customers are the winner in this coopetition.  Even though the walls are coming down, this doesn’t signal the end of HP networking, but customers should be wary of HP’s networking commitment (see Prediction: HP Cuts Loose Their Networking Hardware And Transforms Into A True Networking Alternative).Customers have been telling me they’re putting pressure on HP’s Enterprise Servers and Storage (ESS) of ESSN (Networking) to open the door to choice. Infrastructure and operation teams are telling Forrester that they want the option to leverage newest data center alternatives to HP’s networking infrastructure so that they can:

• Simplify operations.The top priority within I&O over the past three years has been to increase efficiency. Most networking vendors have responded by offering their own way of eliminating the link down state in spanning tree. A few others have taken increased utilization a step further and offer the capability to manage a large pool of switches under one logical grouping like Juniper’s QFabric. With Cisco’s FEX technology, customers can manage up to 24 modules under one logical grouping, which wasn’t possible under HP’s Virtual Connect technology and their IRF technology in their switch line.
• Standardize processes.HP’s Virtual Connect (VC)technology was designed by server teams to simplifying server operations; for example, virtual connect technology allows organizations to move or replace the server without reconfiguring MAC/WWNs, but VC has fallen short in the network controls. As with SANs, there’s no need for VM or server administrators to manage network policies in the hypervisor while network administrators do it on physical switches. Consequently, I&O personnel want solutions providers to move that network demarcation line from the physical port to the virtual one on the hypervisor; network administrators’ roles are evolving so they take ownership of monitoring and controlling traffic in the virtual world. Cisco’s technology provides consistent control from the physical to virtual world under one management domain.
• Scale capabilities.Forrester Research surveys indicate that few enterprise infrastructures have matured their infrastructure to the point where they have created an abstracted set of resources (storage, software, compute, etc.), assessed in a standard way and billed by use. This means a majority of data centers are in the process of evolving with virtualized hardware and legacy systems. Customers can tie them together with Cisco’s 1000v, 2000 series, and HP’s new Fabric Extender.
• Implement it now. At this point, I&O managers are telling us that IBM, Dell, and HP’s converged solution sound good on paper but are too restrictive at this point since they are in the infancy stage. In addition customers are saying they aren’t bothered by the proprietary nature of the data center network, because they can’t wait for VEPA, TRILL, or OpenFlow functionality—mostly waved around by the convergence vendors—and feel all data center networking solutions have various levels of proprietary functionality: QFabric, VCS, IRF, and FabricPath.  Consequently, customers are choosing to stay the course and purchasing networking solutions from traditional networking vendors: Arista, Brocade, Cisco, Juniper, etc… . at least for right now.

What does this mean? More choice. More flexibility. The old days of mainframe computing are over, and there is no sign of customers going back to that model no matter how much marketing spin is put behind converged infrastructures. Besides HP, we’ll see IBM and Dell embrace Cisco’s FEX.

And you might ask, “What about their networking acquisitions?” The real value behind them will be the development of networking expertise to create better orchestration solutions.